S-2.1, r. 14 - Regulation respecting occupational health and safety in mines

Full text
SCHEDULE III
(s. 277)
DESTINATION SIGNALS
The following destination signals shall indicate the stations on the different levels of each shaft of an underground mine and they shall be used concurrently with the other signals required by the Regulation. In addition, the signals must also serve as destination signals for the lower chair level towards which the workers are descending during the sinking of a shaft:
______________________________________________________

Levels Signals
______________________________________________________

Upper landing or 2 bells - pause - 1 bell
skip unloading
landing

Shaft opening 2 bells - pause - 2 bells
1st level 2 bells - pause - 3 bells
2nd level 2 bells - pause - 4 bells
3rd level 2 bells - pause - 5 bells
4th level 4 bells - pause - 1 bell
5th level 4 bells - pause - 2 bells
6th level 4 bells - pause - 3 bells
7th level 4 bells - pause - 4 bells
8th level 4 bells - pause - 5 bells
9th level 5 bells - pause - 1 bell
10th level 5 bells - pause - 2 bells
11th level 5 bells - pause - 3 bells
12th level 5 bells - pause - 4 bells
13th level 5 bells - pause - 5 bells
14th level 6 bells - pause - 1 bell
15th level 6 bells - pause - 2 bells
16th level 6 bells - pause - 3 bells
17th level 6 bells - pause - 4 bells
18th level 6 bells - pause - 5 bells
______________________________________________________
The signals for the lower levels shall follow this progression as the depth increases, unless there are 29 levels or more, in which case the series beginning with the number 9 shall not be used. Consequently, the signal for the 29th level is: 10 bells — pause — 1 bell, and the following signals shall continue in that progression.
O.C. 213-93, Sch. III; O.C. 42-2004, s. 32.